Imilomo yeCarbide

Izixhobo ze-Kedel ngumvelisi oqeqeshiweyo wezixhobo ze-carbide zesamente.Inokuvelisa iindidi ezahlukeneyo zemilomo, njengemilomo yentambo yePDC kunye nemilomo yecone bit.Ngokuqhelekileyo isetyenziselwa ukuhlamba uxinzelelo oluphezulu okanye ukusika kwishishini.Imilomo yeCarbide inokumelana okugqwesileyo kokunxiba, ukuxhathisa umhlwa kunye nobunzima obuphezulu, kwaye isetyenziswa kakhulu ekugrumbeni ioyile, imigodi yamalahle kunye neetonela zobunjineli.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Intshayelelo yeMveliso

I-cemented carbide threaded nozzle yenziwe nge-100% ye-tungsten carbide powder ngokucinezela kunye ne-sintering.Inokumelana nokunxiba okuqinileyo, ukumelana nokugqwala kunye nobunzima obuphezulu.Imisonto ngokubanzi ziinkqubo ze-metric kunye ne-intshi, ezisetyenziselwa ukudibanisa umbhobho kunye nesiseko se-drill.Iindidi zombhobho zidla ngokuhlulwa zibe ziindidi ezine, uhlobo lwe-cross groove, uhlobo lwehexagon yangaphakathi, uhlobo lwehexagon yangaphandle kunye nodidi lwequincunx.Sinokwenza ngokwezifiso kwaye sivelise iintlobo ezahlukeneyo zeentloko ze-nozzle ngokweemfuno ezahlukeneyo zabathengi.

Iingenelo zethu

1. 100% imveliso yezinto ekrwada;

2. Inkqubo yemveliso evuthiweyo;

3. Iimbumba ezityebileyo zokuvelisa iimveliso ezinobungakanani obuhlukeneyo;

4. Izinto ezizinzileyo kunye nokusebenza kwemveliso;

5. Ixesha lenkonzo yemveliso yonyaka omnye ukuqinisekisa umgangatho ophezulu emva kwenkonzo yokuthengisa

Uhlobo lombhobho jikelele

Iinkcukacha

Umzekelo	I-MJP-CSA-2512	I-MJP-CSA-2012	I-MJP-CSA-2002
Ububanzi bangaphandle(A)	25.21	20.44	20.3
Ubude obupheleleyo(C)	34.8	30.61	30.8
Umsonto	1-12UNF-2A	3/4-12UFN-A-2A	M20x2-6h
Idayamitha yaNgaphandle encinci(D)	22.2	16.1	16.1
Ubude(L)	15.6	11.56	11.55
Endoporus(E)	15.8	12.6	12.7
I-Angle ye-Chamfer	3.4x20°	1x20°	2.4x20°
Utshintsho lweArc(J)	12.5	12.7	12.7
IArc yoTshintsho(K)	12.5	12.7	12.7
iPore Diametrer(B)	09#—20#,22#	09#—16#	09#—16#